PCB Manufacturing
Capability Summary - data processing and quality.
Data transfer
Email sales@iconicpcb.com
Data format
Gerber 274X and Excellon2 drill file(s)
Protel XP 2004 PCB
NOTE: All data sets should be in compressed *.ZIP format.
A readme file should be included giving details of product part number and revision number as well as additional product specific and layer specific information such as slots, non plated through hole, layer order and layer name information.
Fabrication
| Maximum single and double sided panel size | 580mm x 480mm |
| Standard multilayer panel size | 395mm x 395mm |
| Number of layers | 8 |
| Core material | 1.6mm, 0.71mm , 0.2mm |
| Foil weight | 0.5oz |
| Prepreg | 2116 |
Layout
| Minimum track to track isolation gap | 0.008” |
| Minimum PTH to inner layer track isolation | 0.008” |
| Minimum non PTH to inner layer track isolation | 0.008” |
| Minimum track width | 0.008” |
| Minimum PTH anulus | 0.008” |
NOTE: Above minima are prefered minima and may be exceeded depending on artwork and tooling cutters in stock lower limit not less than 0.004”.
Drilling
Drill sizes 0.30mm to 1.60mm in increments of 0.05mm, 3.00mm and 3.175mm, other holes will be routed
Hole positional tollerance 0.005mm
Spindle runout 0.008mm at 100 000RPM at the end of 15mm tool
Profile
Scoring 60 degree “V” tool
Routing 2.0mm standard router
Path positional tollerance 0.005mm
Spindle runout 0.008mm at 100 000RPM at the end of 15mm tool
Electrical test
Probot 600 SD quad flying probe tester. Netlist information extracted from Gerber /Excellon data files.
Solder mask
Direct laser photo imageable soldermask process. Soldermask resolution 200 micron.
Finish
- Argentomerse NC non cyanide immersion silver process
- Bare copper
Component legend
Direct laser photo imageable component legend process. Component legend resolution 200 micron.